If you fold your boat for car transport after every trip, compare slatted-floor and inflatable-floor models. A removable rigid floor provides firm footing but involves more assembly. A RIB needs no floor assembly, but its rigid hull stays in one piece for transport.
An inflatable boat for reservoir fishing should have room for everyone and their gear, and be manageable to carry. The floor type accounts for much of the work involved in setting up before fishing and packing away afterwards.
1 Slatted-floor inflatable boats
A practical option for compact storage with few floor-assembly steps.
- Setup: unfold the boat, arrange the slats as specified for the model, inflate, and fit the seats and oars.
- Packing away: clean, dry, deflate and roll up as instructed in the manual.
Honda states that one person can fold and store its small slatted-floor models in minutes. This refers to folding and storage, rather than the complete process including washing and drying. [1, 3]
2 Air-deck inflatable boats
A high-pressure inflatable floor removes the need to assemble rigid floor panels.
- Setup: unfold, position the floor if it is removable, and inflate the chambers in the specified order to the required pressures.
- Packing away: clean and dry the boat, release the air and fold it.
A suitable pump affects setup time: reaching the correct pressure is an essential part of preparation. [1, 3]
3 Boats with a low-pressure inflatable bottom
The bottom forms part of the inflatable structure, as in the GLADIATOR AIR PRO range. This differs from an air deck. [2]
- Setup: unfold, inflate as instructed, and fit the seats and oars.
- Packing away: clean, dry, deflate and fold.
There are no rigid floor panels to install. The time needed depends on boat size, chamber volume and the pump.
4 Boats with a removable rigid floor
An aluminium floor, or another rigid floor specified by the manufacturer, provides firm support for your feet and equipment.
- Setup: partially inflate, fit the panels and side stringers as specified, then complete inflation.
- Packing away: deflate, dismantle the floor, and clean and dry the parts and boat.
This option involves more steps on each trip. Check the weight of the separate carrying bags too. [3]
5 RIBs with a rigid hull
A RIB combines a rigid hull with inflatable tubes. The hull cannot be folded into a bag. [5]
- Setup: no floor assembly is needed; inspection, unloading and launching still take time.
- Packing away: retrieve, load, clean and store the whole boat.
You save assembly work at the shore, but need suitable transport, water access and storage space.
What to check before buying
- Interior dimensions with all your gear, plus the permitted passenger count and load. [4]
- Packed dimensions and the weight of the heaviest carrying bag.
- What is included, the condition of valves and seams, warranty cover and repair support.
How long does it take to set up an inflatable boat
There is no single setup time for every model. Boat size, pump, experience and the number of people helping all matter. Ask for a demonstration and compare assembly, carrying, launching and packing away separately.
Can you pack an inflatable boat away wet
For long-term storage, the boat should be clean and dry. If you transport it while damp after fishing, unfold and dry it as soon as practical. Follow the manual. [4]
Browse inflatable boats at Genesis Fishing. Tell us how many people will be fishing and how you will transport the boat, so we can compare suitable options.
Browse inflatable boats at Genesis Fishing
Sources
Sources checked on 29 October 2026. Follow the manual for your specific boat model.
Post comment