How to prepare your PVC boat for winter

Before putting your boat into winter storage, clean and inspect it so you can identify problems before the next season.

1. Clean. Remove sand and salt with fresh water, mild soap and a soft sponge. Avoid harsh cleaners and do not use a pressure washer on the tubes.
2. Dry. Check beneath the floor and around the transom. Do not fold or cover a damp boat.
3. Inspect. Check the tubes, seams, valves, bottom and transom. If you notice unusual air loss, identify the cause, bearing in mind that temperature also affects pressure.
4. Store correctly. Choose a clean, dry place protected from sunlight. Follow the instructions for your specific model for inflation pressure, folding and storage. Ensure ventilation when covering the boat.

Need a repair? Explore our PVC boat repair and outfitting services.

The engine and battery require separate preparation according to their manuals.