CATALOG
CONTACT
ABOUT
Honda BF30DK2 SHGU / LHGU – Tiller Control
-
Code:BF30DK2LHGU
-
Weight:82.000 Kgs
Honda BF30DK2 SHGU / BF30DK2 LHGU – 30 HP, tiller control, electric start and gas-assisted tilt
The Honda BF30 is a reliable and efficient 30 HP (22.1 kW) four-stroke outboard engine, suitable for fishing, recreational and commercial boats. The BF30DK2 SHGU and BF30DK2 LHGU offer the same power and core equipment, with shaft length being the main difference:
- BF30DK2 SHGU – short shaft S, 431 mm
- BF30DK2 LHGU – long shaft L, 552 mm
Both versions feature tiller steering, electric start, gas-assisted engine tilt for easier lifting, and a 12 V / 10 A charging system for battery charging and onboard electrical equipment.
Standard configuration includes a 25-litre external fuel tank and 3-blade aluminium propeller.
The BF30 is well suited to small and medium-sized boats, RIBs, fishing and utility craft rated by their manufacturer for a 30 HP outboard. The correct SHGU or LHGU version should be selected according to the boat's transom height – approximately 431 mm for the short-shaft model and 552 mm for the long-shaft model.
Quick Buy
The Honda BF30DK2 SHGU and BF30DK2 LHGU are four-stroke, 3-cylinder outboard engines with a displacement of 552 cc and maximum output of 30 HP / 22.1 kW. Their combination of tiller steering, electric starting and gas-assisted tilt makes them a practical solution for boats where direct engine control is preferred over a remote control system.
Key Technical Specifications
Engine
- Type: 4-stroke, OHC, 3-cylinder
- Displacement: 552 cc
- Power output: 30 HP / 22.1 kW
- Full-throttle operating range: 5,500–6,000 rpm
- Fuel system: 3 carburettors with accelerator pump
- Cooling: water-cooled
- Starting system: electric
- Gear selection: Forward / Neutral / Reverse (F-N-R)
- Gear ratio: 2.08:1
- Charging system: 12 V / 10 A
Control & Tilt
- Tiller steering
- Gas-assisted tilt for easier engine lifting
- Direct and convenient access to the main engine controls
Model Differences
- BF30DK2 SHGU: short shaft S – 431 mm; approx. weight 80 kg
- BF30DK2 LHGU: long shaft L – 552 mm; approx. weight 82 kg
Standard Equipment
The configuration includes the main equipment required for operation:
- electric starter;
- tiller control;
- gas-assisted tilt system;
- 12 V / 10 A charging system;
- 25 L external fuel tank;
- 3-blade aluminium propeller.
Depending on the boat installation and intended use, the engine can be complemented with a suitable battery, fuel line and connectors, additional monitoring/instrumentation, alternative propeller matched to boat load and application, protective engine cover and other compatible Honda Marine accessories.
Which Version Should You Choose?
BF30DK2 SHGU – 431 mm short shaft
Designed for boats with a lower transom intended for a short-shaft outboard.
BF30DK2 LHGU – 552 mm long shaft
Designed for boats with a higher transom intended for a long-shaft outboard.
With 30 HP of power, both versions are suitable for a wide range of aluminium, GRP/fibreglass, RIB, fishing and utility boats. The exact boat size and weight should always comply with the boat manufacturer's maximum engine power, load capacity and specified transom/shaft requirements.
Important: shaft length should not be selected based solely on the overall length of the boat. The boat's transom design and height are the primary criteria.
Who it’s for
For boats rated for a 30 HP engine with a compatible transom and permitted engine weight. Configuration: short S / long L shaft; tiller steering. Check the exact variant before ordering.
FAQ
Which configuration does the Honda BF30DK2 offer?
30 HP; short S / long L shaft; tiller steering; electric starting. Select the exact variant on the product card; the listed shaft lengths are alternatives, not one configuration.
Will it fit my boat?
Check maximum permitted engine power and weight, transom height and installation requirements in the boat documentation. Hull length alone does not establish compatibility.
What should I confirm for installation?
Provide the boat model and exact product code. Confirm the propeller and fuel system, plus the required starting battery. Delivery contents must be checked for the specific SKU.
How should the propeller be selected?
Selection depends on hull design, loaded boat weight and the engine operating range. Do not choose diameter and pitch by horsepower alone; confirm suitability for the specific installation.
Which details should I send before ordering?
Provide your boat model, rated maximum engine power and weight, transom height and preferred steering arrangement. Refer to the selected variant and order confirmation for availability and lead time.