CATALOG
CONTACT
ABOUT
Honda BF135DK1XDU
-
Code:BF135DK1XDU
-
Weight:217.000 Kgs
The Honda BF135DK1XDU is a high-performance 135 HP four-stroke outboard combining dependable thrust, smooth operation and efficient fuel consumption. Its 2.4-litre four-cylinder engine with PGM-FI electronic fuel injection is suitable for extended leisure, fishing and professional use.
The XDU version features a 635 mm (25″) extra-long X shaft and electronic remote throttle and shift control for light, precise operation without conventional mechanical control cables. Its configuration includes electric starting, electro-hydraulic Power Trim & Tilt and a 12 V/40 A alternator for battery charging and onboard electronics.
It is suitable for high-transom RIBs, powerboats, fishing boats and leisure craft typically around 6–8 m long, provided that the boat is rated for 135 HP. The electronic control lever, control modules
Quick Buy
The Honda BF135DK1XDU is a four-stroke outboard designed for medium-sized and larger boats requiring strong performance, dependable operation and precise remote control. Its 135 HP output provides useful thrust for reaching plane quickly, carrying heavier loads and cruising efficiently.
The 2354 cc inline four-cylinder engine features a 16-valve DOHC cylinder head and Honda PGM-FI electronic fuel injection. Precise fuel delivery supports dependable starting, smooth acceleration and efficient fuel consumption across the operating range.
The XDU version uses electronic remote throttle and shift control. Commands are transmitted electronically instead of through conventional mechanical cables, providing light lever movement, accurate response and comfortable operation from the helm.
Its 635 mm (25″) extra-long X shaft is intended for boats with a matching high transom. Electro-hydraulic Power Trim & Tilt allows the engine angle to be adjusted for different speeds, loads and water conditions. It also enables the outboard to be raised when moored or operating in shallow water.
The integrated 12 V/40 A alternator charges the starting battery and provides useful capacity for standard navigation instruments, lighting and other onboard electronics. Engine protection functions monitor oil pressure, temperature and engine speed.
Key specifications:
- Output: 135 HP / approximately 99.3 kW
- Engine: four-stroke, inline four-cylinder
- Displacement: 2354 cc
- Valve train: DOHC, 16 valves
- Fuel system: PGM-FI electronic fuel injection
- Full-throttle range: 5000–6000 rpm
- Gear ratio: 2.14:1
- Gear selection: forward–neutral–reverse
- Propeller rotation: standard
- Shaft: extra-long X, 635 mm / 25″
- Controls: electronic remote throttle and shift
- Starting system: electric
- Trim system: Power Trim & Tilt
- Alternator: 12 V/40 A
- Cooling: water-cooled with thermostat
- Exhaust: through the propeller
Suitable boats and additional equipment
The BF135DK1XDU is suitable for high-transom RIBs, fibreglass powerboats, fishing boats and leisure craft, typically around 6–8 m in length. It may be installed as a single outboard or as part of a compatible multi-engine setup. Final suitability depends on the boat’s maximum power rating, transom height, hull design, weight and expected operating load.
Installation may require an electronic control lever, control module and wiring harness, start panel, gauges or compatible display, steering system, battery, fuel system, fuel/water separator and a correctly sized propeller. Exact package contents and component compatibility should be confirmed before ordering.
Who it’s for
For boats rated for a 135 HP engine with a compatible transom and permitted engine weight. Configuration: extra-long X shaft; remote steering. Check the exact variant before ordering.
FAQ
Which configuration does the Honda BF135DK1XDU offer?
135 HP; extra-long X shaft; remote steering; electric starting.
Are throttle and shift electronic or mechanical?
This version uses electronic throttle and shift. Controls, wiring and instruments must be compatible with the specific system.
Will it fit my boat?
Check maximum permitted engine power and weight, transom height and installation requirements in the boat documentation. Hull length alone does not establish compatibility.
What should I confirm for installation?
Provide the boat model and exact product code. Confirm the propeller and fuel system, remote controls, cables, instruments and steering system, plus the required starting battery. Delivery contents must be checked for the specific SKU.
How should the propeller be selected?
Selection depends on hull design, loaded boat weight and the engine operating range. Do not choose diameter and pitch by horsepower alone; confirm suitability for the specific installation.
Which details should I send before ordering?
Provide your boat model, rated maximum engine power and weight, transom height and preferred steering arrangement. Refer to the selected variant and order confirmation for availability and lead time.