CATALOG
CONTACT
ABOUT
Honda BF135DK1XDUNH565 White
-
Code:BF135DK1XDUNH565
-
Weight:217.000 Kgs
The Honda BF135DK1XDUNH565 is a 135 HP four-stroke outboard combining strong thrust, smooth operation and efficient fuel consumption. Its NH565 white finish complements modern RIBs, powerboats and light-coloured hulls.
The XDU version features a 635 mm (25″) extra-long X shaft, electric starting and electronic remote throttle and shift control. Electronic operation provides light, precise commands without conventional mechanical control cables. The configuration also includes electro-hydraulic Power Trim & Tilt and a 12 V/40 A alternator.
It is suitable for high-transom RIBs, powerboats, fishing boats and leisure craft with 25″ transoms, typically around 6–8 m long. The electronic control lever, control modules, displays, steering system and propeller must be matched to the boat and the agreed supply package.
Quick Buy
The Honda BF135DK1XDUNH565 is a dependable 135 HP four-stroke outboard designed for medium-sized and larger high-transom boats. It provides strong thrust for reaching plane quickly, stable performance under load and efficient cruising. Its NH565 white finish complements modern boat designs.
The 2354 cc inline four-cylinder engine features a 16-valve DOHC cylinder head and Honda PGM-FI electronic fuel injection. This design provides dependable starting, smooth acceleration and consistent performance throughout a wide operating range.
A key advantage of the XDU version is its electronic remote throttle and shift control. Commands are transmitted electronically without mechanical control cables, providing light lever movement, fast response and comfortable helm operation.
The 635 mm (25″) extra-long X shaft is intended for boats with a matching high transom. Electro-hydraulic Power Trim & Tilt adjusts the engine angle for different speeds, loads and water conditions. Correct trim supports faster planing, stable handling and economical fuel consumption.
The 12 V/40 A alternator charges the starting battery and provides capacity for standard navigation instruments, lighting and other onboard electronics.
Key specifications:
- Output: 135 HP / approximately 99.3 kW
- Engine: four-stroke, inline four-cylinder
- Displacement: 2354 cc
- Valve train: DOHC, 16 valves
- Fuel system: PGM-FI electronic fuel injection
- Full-throttle operating range: 5000–6000 rpm
- Gear ratio: 2.14:1
- Gear selection: forward–neutral–reverse
- Propeller rotation: standard
- Shaft: extra-long X, 635 mm / 25″
- Controls: electronic remote throttle and shift
- Starting system: electric
- Trim system: Power Trim & Tilt
- Alternator: 12 V/40 A
- Cooling: water-cooled with thermostat
- Exhaust: through the propeller
- Colour: white, NH565
Applications and additional equipment
The BF135DK1XDUNH565 is suitable for high-transom RIBs, fibreglass powerboats, fishing boats and leisure craft with transoms designed for a 25″ shaft, typically around 6–8 m long. It may be installed as a single outboard or as part of a compatible multi-engine setup. Final suitability depends on the boat’s maximum power rating, transom height, hull design, weight and expected load.
Installation may require a compatible electronic control lever, control module and wiring harness, start panel, gauges or multifunction display, steering system, battery, fuel tank and lines, fuel/water separator and a correctly sized aluminium or stainless-steel propeller. Exact package contents should be confirmed before ordering.
Who it’s for
For boats rated for a 135 HP engine with a compatible transom and permitted engine weight. Configuration: extra-long X shaft; remote steering. Check the exact variant before ordering.
FAQ
Which configuration does the Honda BF135DK1XDUNH565 offer?
135 HP; extra-long X shaft; remote steering; electric starting.
Are throttle and shift electronic or mechanical?
This version uses electronic throttle and shift. Controls, wiring and instruments must be compatible with the specific system.
Will it fit my boat?
Check maximum permitted engine power and weight, transom height and installation requirements in the boat documentation. Hull length alone does not establish compatibility.
What should I confirm for installation?
Provide the boat model and exact product code. Confirm the propeller and fuel system, remote controls, cables, instruments and steering system, plus the required starting battery. Delivery contents must be checked for the specific SKU.
How should the propeller be selected?
Selection depends on hull design, loaded boat weight and the engine operating range. Do not choose diameter and pitch by horsepower alone; confirm suitability for the specific installation.
Which details should I send before ordering?
Provide your boat model, rated maximum engine power and weight, transom height and preferred steering arrangement. Refer to the selected variant and order confirmation for availability and lead time.