CATALOG
CONTACT
ABOUT
Reaktor Reinforced PVC Gel Patch 15 ml
-
Code:REA-GELPVC-ARM-015-MIX
-
Weight:0.070 Kgs
Reaktor Reinforced PVC Gel Patch 15 ml is a high-strength compound for cold repair of PVC and other compatible flexible polymers. It is applied directly to the damaged area and normally does not require a separate fabric patch. Carbon, para-aramid and polypropylene fibres reinforce the cured repair layer.
Suitable for punctures, cuts and abrasions on inflatable boats, pools, awnings, boots, waders, neoprene products and other outdoor or water-sports equipment. For assorted-colour products, the supplied colour depends on availability.
Brand: Reaktor
Type: reinforced PVC gel patch for cold repair
Quantity: 15 ml / 20 g according to the retailer listing
Other sizes: 30 ml and 1000 ml
Colours: red, orange, yellow, light blue, white
Estimated Shipping
to Veliko Tarnovo starts at
€1.66
outside Veliko Tarnovo starts at
€1.72
Quick Buy
Reaktor Reinforced PVC Gel Patch 15 ml is a composite cold-repair compound for damaged PVC products and compatible flexible polymers. It contains carbon, para-aramid and polypropylene reinforcing fibres that are distributed throughout the applied layers and strengthen the repaired area.
Compatible materials:
• PVC and PVC-coated technical fabrics;
• neoprene, membrane materials and polyurethane;
• synthetic fabrics and artificial leather.
Not suitable for EVA, polyethylene or PTFE/Teflon.
Applications:
• inflatable boats, small craft, kayaks and rafts;
• pools and inflatable equipment;
• awnings, tents, tarpaulins and polymer coverings;
• fishing boots, waders and overalls;
• sports and specialist footwear;
• neoprene products and wetsuits;
• PVC bags, covers and camping equipment.
Directions:
- Deflate the product and stabilise the damaged area.
- Clean and prepare the surface with Reaktor Activator. Use only an appropriate, pre-tested cleaner on thin or delicate products.
- Shake the tube in different directions for at least 1–2 minutes to distribute the reinforcing fibres.
- Apply several thin coats at 15–30-minute intervals, spreading the gel with the tube nozzle.
- Two or three drops are generally sufficient for a small puncture. Apply two or three thin coats to a cut up to 1 cm long.
- Place polyethylene behind an open cut to prevent the gel from leaking into the inflatable chamber.
According to the manufacturer, limited use may be possible after approximately 30–60 minutes for small punctures and after 2–12 hours or longer for cuts. Actual curing time depends on temperature, damage size and coating thickness. Do not apply full pressure or maximum load before polymerisation is complete.
Technical information:
• type: reinforced PVC gel patch;
• technology: cold repair without a separate patch;
• quantity: 15 ml / 20 g according to the retailer listing;
• reinforcement: carbon, para-aramid and polypropylene fibres;
• interval between coats: 15–30 minutes;
• available sizes: 15 ml, 30 ml and 1000 ml;
• colour range: 11 colours.
Wear suitable gloves and provide adequate ventilation. Use an additional PVC patch and compatible adhesive system, or consult a professional repair service, for large, structural or highly loaded damage. Always test repaired watercraft for air tightness before use.