CATALOG
CONTACT
ABOUT
Victron SmartShunt IP65 300 A – battery monitor
-
Code:SHU065130050
-
Weight:0.320 Kgs
Estimated Shipping
to Veliko Tarnovo starts at
€1.66
outside Veliko Tarnovo starts at
€1.72
Quick Buy
Victron SmartShunt IP65 300 A
For monitoring a service battery on a boat or another DC system. Tracks charge, current, voltage, time remaining and history. There is no separate display.
Key features
- Bluetooth and the VictronConnect app.
- VE.Direct connection to a GX device.
- Auxiliary input for second-battery voltage, midpoint or temperature.
Specifications
- Shunt: 300 A; supply: 6.5–70 V DC.
- IP65 protection; operating temperature: −40 to +50 °C.
- H × W × D: 44 × 120 × 38 mm; connection bolts: M8.
- Configurable battery capacity: 1–9999 Ah.
Installation and accessories
Install in the negative conductor following the Victron diagram. All chargers and loads must be on the system side of the shunt. IP65 does not mean suitable for immersion. A separate VE.Direct cable is required for GX connection. Temperature sensor ASS000100000 is optional. There is no programmable relay or built-in audible alarm.
Genesis Fishing offers equipment for onboard electrical systems in Bulgaria. Check wiring, cable sizing and maximum current before ordering.
Who it’s for
For boat owners and installers who want DC battery monitoring without a separate display. Genesis Fishing, Bulgaria.
Key features
300 A; 6.5–70 V DC; IP65; Bluetooth/VictronConnect; VE.Direct; M8 connection bolts.
Unique differentiators
Shunt and monitor in one unit; configurable auxiliary input; no programmable relay.
Why this product
Monitor a service battery from a phone and integrate with GX when system current is within the shunt rating.
FAQ
Q: Is it a battery charger? A: No. It monitors the battery; it does not charge it or disconnect power. Q: What voltage does it support? A: Supply range is 6.5–70 V DC. The shunt is rated at 300 A. Check maximum system current. Q: Is a separate display required? A: Read data in VictronConnect over Bluetooth or on a GX device using a separate VE.Direct cable. Q: Can it be submerged? A: No. IP65 protects against dust and water jets, not immersion. Install as instructed in the manual. Q: Can it measure temperature and a second battery simultaneously? A: Configure the auxiliary input for one function: second battery, midpoint or temperature. Temperature requires the optional ASS000100000 sensor. Q: How is it configured for different batteries? A: Set capacity and synchronisation parameters for the particular battery. It is a monitor with no charging modes.