CATALOG
CONTACT
ABOUT
Victron SmartShunt IP65 500 A – battery monitor
-
Code:SHU065150050
-
Weight:0.420 Kgs
Estimated Shipping
to Veliko Tarnovo starts at
€1.66
outside Veliko Tarnovo starts at
€1.72
Quick Buy
Victron SmartShunt IP65 500 A – battery monitor
A battery monitor with a 500 A shunt and IP65 protection. View data in VictronConnect over Bluetooth, or connect to a GX device through VE.Direct.
Specifications
- Shunt: 500 A
- Supply: 6.5–70 V DC
- IP65
- Bluetooth/VictronConnect; VE.Direct
- H × W × D: 46 × 120 × 54 mm; M10 bolts
- Configurable capacity: 1–9999 Ah
Installation and accessories
Install in the negative conductor; all chargers and loads must be on the system side of the shunt. No local display or programmable relay. IP65 is not suitable for immersion. A VE.Direct cable to GX and ASS000100000 temperature sensor are separate accessories.
Genesis Fishing offers equipment for onboard electrical systems in Bulgaria. Check voltage, wiring and required accessories before ordering.
Who it’s for
For boat owners and installers needing DC battery monitoring without a separate display. Genesis Fishing, Bulgaria.
Key features
Shunt: 500 A; Supply: 6.5–70 V DC; IP65; Bluetooth/VictronConnect; VE.Direct; H × W × D: 46 × 120 × 54 mm; M10 bolts; Configurable capacity: 1–9999 Ah
Unique differentiators
Monitor and 500 A shunt in one IP65 module; configurable auxiliary input.
Why this product
For monitoring through a phone or GX device when maximum current is within the shunt rating.
FAQ
Q: Is it a battery charger? A: No. It monitors the battery; it does not charge it or disconnect power.
Q: What voltage does it support? A: Supply range is 6.5–70 V DC. The shunt is rated at 500 A. Check maximum system current.
Q: Is a separate display required? A: Read data in VictronConnect over Bluetooth or on a GX device using a separate VE.Direct cable.
Q: Can it be submerged? A: No. IP65 protects against dust and water jets, not immersion. Install as instructed in the manual.
Q: Can it measure temperature and a second battery simultaneously? A: Configure the auxiliary input for one function: second battery, midpoint or temperature. Temperature requires the optional ASS000100000 sensor.
Q: How is it configured for different batteries? A: Set capacity and synchronisation parameters for the particular battery. It is a monitor with no charging modes.