CATALOG
CONTACT
ABOUT
Victron BMV-712 Smart Black – battery monitor
-
Code:BAM030712200
-
Weight:0.300 Kgs
Estimated Shipping
to Veliko Tarnovo starts at
€1.66
outside Veliko Tarnovo starts at
€1.72
Quick Buy
Victron BMV-712 Smart Black – battery monitor
Battery monitor with a black display, Bluetooth and included 500 A / 50 mV shunt. Tracks charge, current, voltage and time remaining.
Specifications
- Supply: 6.5–70 V DC
- Included shunt: 500 A / 50 mV, M10 bolts
- Bluetooth/VictronConnect and VE.Direct
- Configurable capacity: 1–9999 Ah
- Display: Ø63 mm; body: Ø52 mm, depth 31 mm
- IP55; not intended for outdoor installation
- Programmable relay: 60 V / 1 A, normally open
Installation and accessories
Install the display in a protected location and the shunt in the negative conductor as instructed. A 10 m RJ12 cable and 2 m fused battery cable are included. The VE.Direct cable to GX and ASS000100000 temperature sensor are separate accessories.
Genesis Fishing offers equipment for onboard electrical systems in Bulgaria. Check voltage, wiring and required accessories before ordering.
Who it’s for
For boat owners and installers who want a local display and phone access to service-battery data. Genesis Fishing, Bulgaria.
Key features
Supply: 6.5–70 V DC; Included shunt: 500 A / 50 mV, M10 bolts; Bluetooth/VictronConnect and VE.Direct; Configurable capacity: 1–9999 Ah; Display: Ø63 mm; body: Ø52 mm, depth 31 mm; IP55; not intended for outdoor installation; Programmable relay: 60 V / 1 A, normally open
Unique differentiators
Local display, included 500 A shunt and programmable relay; configurable auxiliary input.
Why this product
Useful for monitoring a service battery when readings are needed without a phone.
FAQ
Does it charge the battery?
No. It is a monitor, not a charger or BMS.
What voltage and current does it support?
6.5–70 V DC; the included shunt is 500 A / 50 mV. All loads and chargers must connect on the system side of the shunt.
Does it have its own display?
Yes, a black display, plus Bluetooth for VictronConnect and VE.Direct for GX.
Can it be installed on an exposed deck?
No. The datasheet specifies IP55 and states it is not intended for outdoor use. Protect the shunt and connections too.
Can it measure temperature and a second battery simultaneously?
The auxiliary input is configured for one function: second-battery voltage, midpoint or temperature. The temperature sensor is separate.
Can it monitor lithium batteries?
Set capacity and synchronisation parameters for the battery. It does not replace the battery BMS or provide charging protection.