Victron Smart IP43 12/50(3) 120/240 V – three-output battery charger

For owners and installers of onboard electrical systems. Genesis Fishing, Bulgaria.

Battery: 12 V; total charge current: 50 A; LOW: 25 A; 3 outputs; combined current cannot exceed the rating; Input: 85–250 V AC, full power from 100 V AC, startup from 90 V AC; 45–65 Hz; IP43; natural convection cooling; 180 × 249 × 116 mm; 2.7 kg; Bluetooth, VE.Direct, remote on/off and programmable relay; Full rated output to 40 °C; derating above 40 °C

AC charger for 12 V batteries with three outputs, 50 A total, Bluetooth and VE.Direct. Outputs share one charging profile.

Choose a dry, ventilated, protected location. The AC cord for the IEC C14 inlet is ordered separately. Select DC cables, fuses, VE.Direct cable and external sensor separately for the installation. Avoid water jets and immersion.

What battery voltage is it for?
This SKU is for 12 V batteries. 120/240 V describes the AC supply, not the battery.

Does each output deliver the rated current?
Each can supply up to 50 A, but all three combined cannot exceed 50 A.

Can it charge different chemistries at once?
Outputs share one profile. Do not connect batteries with incompatible charging requirements. Select NORMAL, HIGH, LITHIUM or a custom profile for the battery; RECONDITION is not for lithium batteries.

Is a mains cable included?
No. Order the suitable IEC C14 AC cord separately.

Can it operate on an exposed deck?
IP43 does not protect against immersion or water jets. Install in a protected, ventilated compartment as instructed.

How does it connect to GX or a BMS?
Use a separate VE.Direct cable for GX. A compatible BMS can control remote on/off; check the particular wiring design. External sensing via VE.Smart Networking is optional.